a. The Hearing aids need to be paired to the ReSound Unite Phone Clip to create a private link for further communication, as well as to allow information to be transferred between the devices.
b. Your Hearing Care Professional will be able to complete the pairing process via dedicated fitting software.
c. The hearing aids can also be paired to the ReSound Unite Phone Clip by pressing the pairing button on the Unite Phone Clip and opening and closing the battery doors on the hearing aids within 20 seconds.
The ReSound Unite Phone Clip works with a wide range of Bluetooth devices. To find compatible devices look for products supporting one or more of the following Bluetooth profiles: Hands free, Headset. Both profiles are supported by the ReSound Unite Phone Clip.
In combination with the ReSound Unite Phone Clip, your hearing aids can function as a headset for Bluetooth-enabled mobile phones and landline phones. To find out which mobile phones are compatible with the ReSound Unite Phone Clip for hands free talk, please look for the Mobile Phone Pairing Guide on your local Resound website.
The pairing procedure is controlled by your mobile phone. Different mobile phones have different menu structures. You should therefore refer to your mobile phone’s manual if you cannot complete the pairing procedure with the generic steps described here. a. Make sure the Phone Clip is turned OFF, and your mobile phone is turned ON. Place them next to each other.
Press and hold the multifunctional button on the Phone Clip for 7 seconds. The LED will now be solid blue for two minutes indicating that Bluetooth pairing mode is active. The ReSound Unite Phone Clip will be in Bluetooth pairing mode only in the first two minutes after having been turned ON.
b. Find the connectivity settings of your phone. Look for the 'Bluetooth' feature in the main menu or one of the submenus, such as 'Connectivity'.
c. On your mobile phone, ensure that the Bluetooth is turned ON.
d. On the mobile phone choose to search for Bluetooth devices.
e. Your mobile phone should present a list of Bluetooth devices discovered. Select 'Hearing Aid Phone' from this list.
f. Your mobile phone may then ask you to enter a passcode. If so, enter '0000' (four zeros). Your ReSound Unite Phone Clip should now be paired to your mobile phone. Some mobile phones may ask which Bluetooth service you wish to enable, select 'Headset'.
a. The Unite Phone Clip may be outside the range of the device you are trying to pair it with. Move the devices closer together and reattempt pairing.
b. Unite Phone Clip may not be in pairing mode.
This could be caused by a number of things:
a) The Unite Phone Clip is powered off: Power on The Unite Phone Clip.
b) The Unite Phone Clip and mobile phone have not been paired: Perform the Bluetooth pairing process and make a Bluetooth connection between The Unite Phone Clip and the mobile phone.
c) The Bluetooth connection between The Unite Phone Clip and the mobile phone is lost: Assure that Bluetooth is enabled in the mobile phone and make a Bluetooth connection between The Unite Phone Clip and the mobile phone again, e.g. by pressing the multifunction button briefly on The Unite Phone Clip.
Clip your ReSound Unite Phone Clip on your sweater, jacket or other clothing so that the microphone inlet faces upwards. Keep the device within a range of 10-30 cm (4-12 inches) from your mouth.
To turn ON your ReSound Unite Phone Clip, press and hold the multifunctional button for about 3 second until you see the LED indicator blinking.
To turn it OFF, press and hold the multifunctional button for about 3 seconds until the LED indicator flashes quickly 4 times and then goes dark.
The ReSound Unite Phone Clip and hearing aids are not within wireless range: Assure that Phone Clip and hearing aids are within wireless range.
The battery in the hearing aid is so depleted that it no longer supports audio streaming: Replace the battery in the hearing aid with a new one.
No. When you pair the ReSound Unite Phone Clip to a Bluetooth-enabled phone, you are creating a private link between only these two Bluetooth devices. An encryption key is generated to encrypt all further communication providing for maximum privacy.
Other radio frequency devices in near proximity may cause interference, usually adding a crackling noise. Examples of such devices are other Bluetooth devices, wireless networks, microwave ovens, baby monitors and remote controls.
Battery consumption and the operating time of your ReSound Unite Phone Clip depend greatly on the usage of the device. On average, a fully charged battery will allow for 5 1/2 hours talk time and 100 hours of standby.
To charge the ReSound Unite Phone Clip, plug the charging cable into the ReSound Unite Phone Clip. Then plug the other end of the charging cable into a power outlet.
No, it isn’t. Like other electronic devices, exposure to water or excessive moisture may damage the product. If the Unite Phone Clip is unintentionally exposed to water or moisture, wipe it carefully.
When a call is received on your mobile phone, the Bluetooth indicator will flash and you will hear the ringing tone in your hearing aids. You can accept the call in two ways:
a. To accept the incoming call, briefly press the multifunctional button on your ReSound Unite Phone Clip. If you are wearing two hearing aids, the caller’s voice will be streamed to both of them.
b. You can also accept calls by pressing the accept button on your mobile phone.
To reject incoming calls press the multifunction button twice on the Phone Clip.
You can also reject calls by pressing the reject button on your mobile phone.
To end a call via your ReSound Unite Phone Clip, briefly press the multifunctional button. The call will terminate and your hearing aids will return to the last used program.
You can also end calls by pressing the appropriate button on your mobile phone.
Initiating a phone call is not any different with or without ReSound Unite Phone Clip: Simply use the mobile phone keyboard to enter or select the number to dial. If connected, the phone streaming mode will be activated automatically, and you will hear the ring tones in the hearing aids.
Your ReSound Unite Phone Clip has an easy to operate volume control for increasing or decreasing the loudness of the streamed signal. Depending on the phone, you can also utilize the volume control that is built in your mobile phone. It is also possible to use the ReSound Unite Remote Control (optional) to adjust the volume.
Yes, you can change ring tone on your mobile, and that will be the tone you hear when the phone rings.
The ReSound Unite Phone Clip may be out of the hearing aids range: Try to move the ReSound Unite Phone Clip closer to the hearing aids.
If the multifunctional button on the Unite Phone Clip is pressed for more than 3 seconds the mobile will turn off. Make sure that you press the button rapidly to answer a call.
Be sure to speak straight into the microphone, keeping it 10-30 cm (4-12 inches) from your mouth. Do not let the ReSound Unite Phone Clip rub against your clothing or anything else during calls.
If the 'auto answer' feature is supported by the mobile phone and has been turned on. Then this feature enables you to receive calls without having to touch either phone or ReSound Unite Phone Clip.
a. The Hearing aids need to be paired to the Remote Control to create a private link for further communication, as well as to allow information to be transferred between the devices.
b. Your Hearing Care Professional will be able to complete the pairing process via the Aventa 3. fitting software.
c. The hearing aids can also be paired to the Remote Control by pressing the pairing button on the remote control and opening and closing the battery doors on the hearing aids within 20 seconds.
On some Bluetooth phones, all signals are being sent to the connected Bluetooth device. For most phones, this can be turned off by setting the phone in 'silent' mode so that pressing buttons or receiving messages does not generate sounds in the phone
Up to 8 Bluetooth devices can be paired with the Phone Clip, but only 1 Bluetooth device can be connected at a time.
|
|